How to apply your decals
To ensure your decals last a long time, please follow these easy steps
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.
Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.
*Use a pin to poke any air bubbles in the center and push the air out through the hole.
*The recommended optimum temperature for applying graphics is 70°F. For best results do not apply a sticker in extreme hot or cold temperatures.
Decals on Windows - Inside or Out?
Decals can be applied both inside or out on glass.
installed on the outside exposes it to weather, damage from carwash brushes and so forth but is much simpler to apply
Decals that you plan to apply on the inside of the window will last much longer as it won't be exposed to the elements but you will need to specify on your order as such as it will have to be cut in reverse image so it displays properly when viewed from the outside.
Our decals are made with 7+ year rated vinyl when applied to exterior surface and will last longer than this if applied on the interior.
Magnetic Signs - for Vehicles or Fridge magnets
Any of our decals can be applied to magnetic sign material, if you wish your decal applied to magnetic sign material when we make it, please specify this on your order